|
LBi-R1: Health Ventilation Delivery
Product may assist in a project obtaining this requirement by protecting the quality of air drawn into buildings for ventilation and ensuring the air within the immediate public domain around buildings is not contaminated by local exhaust emissions from buildings or car parks or providing ventilation rates in compliance with the thresholds set out in ASHRAE 62.1:2007
|
Points Available
Requirement
|
|
LBi-1: Ventilation Quality
Product may assist in a project obtaining credit points for providing a CO2 monitoring and alert system, and achieving outdoor air ventilation rates 15% above the minimum rates established in LBi-R1.
|
Points Available
3
|
|
LBi-2.1: Material Emissions: Adhesives & Sealants
Product may assist in a project obtaining credit point as an adhesive or sealant that meets the prescribed VOC limits in the South Coast Air Quality Management District Rule 1168.
|
Points Available
1
|
|
LBi-2.2: Material Emissions: Paints & Coatings
Product may assist in a project obtaining credit point as a paint or coating that meets the prescribed VOC limits and is fungal resistant.
|
Points Available
1
|
|
LBi-2.3: Material Emissions: Carpet & Hard Flooring
Product may assist in a project obtaining credit point as a
Carpet, carpet cushion that meets or exceeds the Carpet and Rug Institute Green Label or Green Label Plus Program or Greenguard Certification Program for Carpets
Or
Hard flooring system or finish with FloorScore or Greenguard Indoor Air Quality Certification
Or
A wood flooring product that does not exceed class E1 for formaldehyde content, does not exceed 5 ppm of Pentachlorophenol content.
|
Points Available
1
|
|
LBi-2.4: Material Emissions: Ceiling Systems
Product may assist in a project obtaining credit point as a ceiling system that complies with the requirements of BS EN 13964:2004 of no asbestos, formaldehyde content not exceeding class E1, and any adhesives, sealants, paints and coatings comply with the requirements of LBi-2.2 and 2.3.
|
Points Available
1
|
|
LBi-2.5: Material Emissions: Formaldehyde Reduction
Product may assist in a project obtaining this requirement by eliminating the human health risks associated with formaldehyde in building materials and products as a internal construction material or installed furniture that does not exceed formaldehyde content class E1 levels.
|
Points Available
2
|
|
LBi-4: Car Park Air Quality Management
Product may assist in a project obtaining this credit by providing adequate air quality within enclosed car parks. Credit point is achieved if the ventilation design meets or exceeds requirements for CO, NO2, and particular matter concentrations in car parks, as determined in ASHRAE 62.1.2007.
|
Points Available
1
|
|
LBi-5.1: Thermal Comfort & Controls: Thermal Zoning
Product may assist in a project obtaining this credit point by using thermal zoning of the ventilation system. Credit points are achieved where separately controlled thermal zones have been provided for the prescribed areas.
|
Points Available
1
|
|
LBi-5.2 Thermal Comfort and Control: Occupant Control
Product may assist in a project obtaining this credit by ensuring
That the ventilation/temperature control system for mechanical ventilation allows for individual occupant control of temperature and or air speed as follows:
1 Credit Point: a minimum of one control per two occupants in the occupied area
1Credit Point: provide occupancy sensors linked to HVAC control systems that automatically adjust temperature and air flow based on occupancy
Or for Mixed-mode Ventilation:
1 Credit Point: the provision of operable windows for 50% of the occupied are
2 Credit Points: the provision of operable windows for 75% of the occupied area
As per ASHRAE 62.1.2007
|
Points Available
2
|
|
LBi-6: High Frequency Lighting
Product may assist in a project obtaining this credit by ensuring no incandescent lamps are required as high frequency electronic ballast or other efficient means of electric lighting. Credit point is achieved if 95% of luminaries incorporate high frequency and occupancy sensors in all rooms intended for individual occupancy, meeting rooms, office spaces, and hallways or corridors.
|
Points Available
1
|
|
LBi-7: Daylight & Glare
Product may assist in a project obtaining this requirement by optimising interior access to daylight for the purposes of improved health and comfort for building users. To achieve credit points daylight and occupancy sensors must be installed to light fittings that receive daylight and in all rooms intended for individual occupancy, meeting rooms, open plan office spaces, and hallways or corridors; all windows have manually or automated controlled internal or external glare control devices, and automated glare control devices are connected to the building management system; the prescribed minimum daylight illuminance is met for 50% of the occupied are for one point, and 75% for two credit points.
|
Points Available
2
|
|
LBi-8: Views
Product may assist in a project obtaining this credit by contributing to a direct line of sight to the outside through vision glazing. Credit point is achieved where 75% of the nominated areas have vision glazing.
|
Points Available
1
|
|
LBi-9: Indoor Noise Pollution
Product may assist in a project obtaining this credit by improving the noise isolation of normally occupied premises/rooms to reduce impact of unwanted noise. Credit point is achieved if internal ambient noise levels do not exceed 50 dBa or the prescribed level for the nominated areas.
|
Points Available
1
|
